Technical Definitions of Grating:

The technical definitions of grating examine and define the various parts in the manufacture and production of grating, which are fully and comprehensively explained below.

Bearing Bars: The set of parallel members, usually rectangular in cross section, which are responsible for withstanding the load-bearing force and relying on suitable supports at least at both ends, are called grating bearings.

Cross Bars: The most important task of the interfaces is to connect the loaders to each other and maintain their integrity and prevent their buckling, so the role of load bearing by the interfaces is ignored.

Banding Bars: Straps that are placed at both ends and sides of the grating are called frame straps. Which are usually the same height as the bearing belts.

Pitch: The distance from the center to the center of both carriers is called the carriers step and the distance from the center to the center of both interfaces is called the interface steps.

Mesh: The distance between two porters or two interfaces is called the mesh.

Length Of Grating: The external size of the grating in the direction of the loaders is called the grating length.

With Of Grating: The external size of the grating in the direction of the interfaces is called the grating width.

Span: The internal distance of the abutment from each other is called the opening. The most important factor in designing any grating is the size and direction of the span or the direction of the loaders.

Support: It is called a part of the structure, on which the bearers are usually placed. How to place the grating on the support requires compliance with its own standards.

Serration belt: Toothed belts are used to prevent slipping in certain places.

It is worth mentioning that you, dear customers, if you have any questions about the technical definitions of grating and related issues, you can contact Arak Rail Company and get in touch with our experts.